This Canteen project is located in Chile .Adopt with cold-formed thin-walled steel frame + rock wool sandwich panel. Building area 474 m2 (outer line of the outside wall), roof slope 18 degree.
Left side of the whole building is 20ft referee container .See layout plan for details
0.30 kN/m2 Wind load
0.25 kN/m2 Roof dead load
0.30 kN/m2 Roof live load
0.80 kN/m2 Floor dead load
2.00 kN/m2 Floor live load
The overall frame:
the frame is cold-rolled thin-walled steel frame (200x90x35x2.5mm) + C-type purlins ( galvanized steel sheet. Q345), and the surface is hot-dip galvanized 275g/m2. No paint is needed.
If you have any questions about our products, please do not hesitate to contact us.